Mobile EV Charging Repair
Specialist Port & Handshake Diagnostics | London Mobile Service
Charging Emergency
07779 836677Technical Support
07448 457247Stuck Cable & Latch Repair
If your charging cable is trapped or won't lock, the motorized actuator is likely failed. We provide mobile emergency cable release and on-site latch replacement for all Type 2 and CCS ports.
- Emergency Release
- Actuator Swap
- Alignment Correction
- Latch Timing Reset
Communication Errors
When the car and charger fail to "handshake," it's often a fault in the Control Pilot (CP) or Proximity Pilot (PP) circuits. We use oscilloscopes to trace signal integrity and resolve communication breaks.
- CP/PP Signal Trace
- Handshake Reset
- Port Pin Cleaning
- Protocol Diagnostics
OBC & Charging Logic
Internal charging faults often stem from the On-Board Charger module. We perform deep-level diagnostics to determine if the fault is internal to the vehicle or external to the charging station.
- OBC Error Scanning
- Firmware Soft-Reset
- Thermal Sensor Test
- HV Fuse Inspection
Overheating & Safety
High resistance in the charging port can cause thermal sensors to trip, stopping the charge. We diagnose port overheating issues and resolve safety interlock faults that prevent high-voltage intake.
- Thermal Sensor Fix
- Interlock Diagnosis
- Resistance Testing
- HV Safety Reset